It’s hot outside, and you’ve already turned on the coldest setting on the air conditioner, but the room smells bad or doesn’t appear to be cooling down? Don’t worry! It simply means your air conditioner has to be cleaned. After all, once you have invested in the best 1.5-ton split AC 5 star, you must look after it!
Because keeping your air conditioning system clean is the best thing you can do for it, we’ve put together a quick instruction on how to clean a split air conditioner. With this step-by-step tutorial, you’ll be able to clean a split and breathe the clean, fresh air you deserve.
The air conditioner filter should be cleaned once a month, and it should be covered with a sheet when not in use for long periods to prevent dust and mold buildup. I found the most effective methods for cleaning the air conditioner in the house!
Table of Contents
When and how should you clean a split air conditioner?
Before you can learn how to clean a split, you must first understand when appropriate. There are two unmistakable signals that your air conditioner needs to be cleaned, especially if you haven’t done so since you purchased it. The following are some of them:
Mold symptoms: This indicates that germs have accumulated in your air conditioner, and the air it produces is no longer clean. Mold can grow naturally due to dampness, but you should clean the filter once a month if you use your air conditioner daily.
Dust: Dust will build on your air conditioner’s fins and cooling coils, and the last thing you want is dust spreading around your home or on your family members while it’s running. Cleaning the cooling fins and air conditioning coils is equally as vital as cleaning the filters, and it should be done regularly.
Also see: Best Window AC in India
Step-by-step instructions on how to clean a split AC:
The inside and exterior units make up a split-type air conditioner. If you don’t know how to disassemble a split air conditioner, don’t worry. As you clean it, we teach you how to do it. It is not difficult to learn how to clean a split air conditioner, but you must complete all of the stages. Before beginning, read your model’s instructions to learn how to clean a split air conditioner properly.
- Turn the unit off and remove the exterior cover. The air filters should be removed from the grill.
- If you detect dust on the lid, gently vacuum it, and the dust on the filters will be sucked up.
- For obstinate filth, use a soft bristle brush, and wash the grids and filters with warm water and Cif Ultra Hygiene Cream.
- If the filter is filthy, you can always soak it in cold water with detergent. If the water is too hot, it will cause damage. Remember to thoroughly rinse the air conditioner filter and allow it to dry in the shade.
- To eradicate bacteria, thoroughly clean the tubes below the filter. You might use a vacuum cleaner or a moist towel to clean the area.
- Remove the frame that allows access to the fan coil, making sure to save the screws. Rinse with a moist cloth after spraying with a hydrogen peroxide solution.
- Allow it to dry before putting it back together once all of the parts are dry. You’ve cleaned an air conditioner before!
If there are still issues, you should consider getting your air conditioner serviced by specialists.
When should you have your air conditioner serviced?
Preventive maintenance for air conditioners is usually done once a year. This is because it gets dirty over time (internal filter, internal coil, exterior filter, turbine, etc.) and checks the refrigerant gas pressure. If it is low, it must be recharged, and, maybe more critically, the system’s tightness must be checked.
The loss of performance is one of the most severe repercussions of a lack of maintenance. Another thing that happens is that the computer begins to freeze. Read our team freezing notice for more information.
If used frequently (8 or more hours per day), it may be required to review more often; however, it can wait up to two years if used infrequently. Never put off maintenance for more than this amount of time, as we will be putting the entire equipment at risk for something that may be inexpensive and simple to remedy.
These are some of the most common issues with air conditioners:
- Due to a leak or a lack of recharging, equipment is without gas.
- During operation, there is noise from the water movement.
- The compressor does not generate any heat. The air conditioner owner notices that the unit has ceased cooling in this situation.
- The device will not turn on.
- The compressor will not turn on. The compressor does not make any noise, and the electrical supply either does not reach the compressor or is insufficient.
- Electrical connections that aren’t up to code. This is generally caused by fundamental issues such as a cable that does not fit properly in the socket or a tube in poor condition.
- Failure of the compressor.
- The apparatus does not have a cooling system. As previously said, this is a pretty typical mistake.
- Compressor failure.
- Low or improper tension is a problem.
- An incorrect connection has been made.
- Other than what is indicated as thermal protection.
- The front panel is soaking with water.
- The thermostat or temperature sensor is broken.
- The size of the circuits is a problem (amps)
- In the liquid line, there is a flash of gas.
- Piping design that isn’t up to snuff. This may be due to a high vertical height.
- The compressor cycles on and off excessively.
- The system has been contaminated. A variety of factors can cause moisture in the system.
- Failure of a power element or a loss of load
- Condensing pressure is low. Air-cooled condensing systems occur when the pressure control system fails or is improperly adjusted.
- The device will not turn on. It could be that it is not fully plugged in, the circuit breaker has tripped, or the fuse has blown as a significant failure.
- Overheating from refrigerant or oil.
- An excessive amount of oil has accumulated in the evaporator.
Cleaning should not be done by someone who has not received prior instruction.
A certified and trained professional should always be consulted because if we make a mistake, we risk jeopardizing the artifact’s integrity and our own or the person in charge’s health.
We must remember that we are dealing with electric current, which must be treated with respect.
So, this article ends here. If you have liked this article, do check out our other air conditioner articles. Thanks a lot for going through this article.
